Superior Swimming Pool Renovations

Resurfacing With Fibre Tech Pool Preserver Process

Treasure Pools employs the Fibre Tech Pool Preserver Process. The Fibre Tech surface offers numerous advantages including improving a property's overall image, and greatly reducing maintenance time and operating costs. In fact, several months into the operation of a pool resurfaced by Fibre Tech , a noticeable decrease should be observed in cleaning labor, chemical usage, heat loss and algae build-up. The Fibre Tech surface actually costs less in time and money in return for a fresh new appearance. Isn't that worth the investment?

Fibre Tech® Logo

Whether it is a water fountain, zoological setting, swimming pool, aquarium or water attraction, Fibre Tech coatings are uniquely designed for any situation where a seamless, structurally sound, waterproof barrier is needed. Fibre Tech coatings permanently adhere to concrete, wood, steel, aluminum, asphalt, or virtually any structurally sound surface.

Upgrade, Recreate or Augment Your Backyard Oasis

Treasure Pools also designs and installs new pool decks, waterfalls and swim caves, hot tubs and spas. Or you can upgrade your setup with new heat pumps, salt systems, automation and much more. We will help you to identify your objectives and work within your budget to integrate any number of design features and accessories:

Decorative Elements
Create Fountains and Waterfalls
Integrate a Jet Spa or Hot Tub
Construct Swimming Caves and Bridges
Install Custom Mood Lighting and Underwater Lighting
Add Gazebos and Shaded Areas
Build a Swim Up Bar
Add a Diving Board or Water Slide

Equipment Upgrades
Upgrade to Salt Water Systems or Solar Heating
Install Multiple Pumps and Automated Filtration Systems

Decks and Coping
Install Travertine Marble or Lava Rock Pool Decks
Integrate Custom Inset Glass or Ceramic Tiling
Install a Ledge Stone Surround

Benefits of the Fibre Tech Pool Preserver Process

Instantly improves a property's image
Saves on overall operating costs of a swimming pool
No more acid washing, wire brushing or re-marciting
Saves up to 35-50% on chemical costs*
Minimizes maintenance time and labor costs

* Individual savings may vary

The Fibre Tech Process: From Start To Finish

Step 1: Pool Preparation
First, our trained Treasure Pools technicians grind the original swimming pool surface to make it smooth and contaminant-free. We fill all cracks and voids and cut seal lines around all fittings and accessories.

Step 2: FibreLock Kote (FLK)
After preparing the surface, the Treasure Pools team applies the FibreLock Kote (FLK) . FLK is a unique product developed by Fibre Tech to create the strongest cohesive bond possible. FLK is designed to penetrate and "lock seal" the tiny pores in the surface of your swimming pool. This enhances cohesion of Fibre Tech , providing an ultra tight grip to any aquatic surface.

Step 3: Resin Application
Next, we carefully apply the first coat of Fibre Tech resin. This resin is specifically designed for pool resurfacing. The coating bonds to the pool's surface yet remains flexible so it won't pull away, shrink or warp. Don't be fooled by companies using inferior resins that are not formulated for use in the chemically-treated aquatic environments.

Step 4: Fiberglas Mat
Then the Treasure Pools team hand-lays an Owens-Corning Fiberglas mat while the first resin coat is still damp. Hand-laid mat provides consistent thickness and color, providing critical strength and flexibility to the finished product.

Steps 5 & 6: Two More Resin Coats
Now our team applies a second layer of Fibre Tech resin . Special tools are used to smooth the fiberglass coating to conform to the contours of the surface, force out air pockets and combine all the layers into one.

Finally, the Treasure Pools team hand-sands the surface to remove any sharp points, and a third coat of resin is applied. This final layer is what gives the surface its smooth, non-porous finish.

Step 7: Finishing Touches
Racing lanes, step highlights, etc. are applied at this time. The surface will skin dry in about 1 hour and totally cure in approximately 4 hours from application.

Fiberglas and Owens-Corning are registered trademarks of Owens-Corning Fiberglas Corporation.
Fibre Tech Pool Preserver is a registered trademark of Fibre Tech Inc.

MORE INFORMATION
Fibre Tech Brochure (1.04Mb PDF File)
The Fibre Tech Solution (1.24Mb PDF File)
Why Fibre Tech ? (2.8Mb PDF File)
Fibre Tech - The Company (654Kb PDF File) .

Find out just how affordable and easy it will be to update your old swimming pool to its former glory or add on that perfect backyard accessory, from gazebos to water slides! Call 1-800-281-7946 today for a FREE estimate on your new swimming pool or remodel! Or submit a contact form to Treasure Pools and we’ll call you!

	Step 1: Pool Preparation First, our trained Treasure Pools technicians grind the original swimming pool surface to make it smooth and contaminant-free. We fill all cracks and voids and cut seal lines around all fittings and accessories.
	Step 2: FibreLock Kote (FLK) After preparing the surface, the Treasure Pools team applies the FibreLock Kote (FLK) . FLK is a unique product developed by Fibre Tech to create the strongest cohesive bond possible. FLK is designed to penetrate and "lock seal" the tiny pores in the surface of your swimming pool. This enhances cohesion of Fibre Tech , providing an ultra tight grip to any aquatic surface.
	Step 3: Resin Application Next, we carefully apply the first coat of Fibre Tech resin. This resin is specifically designed for pool resurfacing. The coating bonds to the pool's surface yet remains flexible so it won't pull away, shrink or warp. Don't be fooled by companies using inferior resins that are not formulated for use in the chemically-treated aquatic environments.
	Step 4: Fiberglas Mat Then the Treasure Pools team hand-lays an Owens-Corning Fiberglas mat while the first resin coat is still damp. Hand-laid mat provides consistent thickness and color, providing critical strength and flexibility to the finished product.
	Steps 5 & 6: Two More Resin Coats Now our team applies a second layer of Fibre Tech resin . Special tools are used to smooth the fiberglass coating to conform to the contours of the surface, force out air pockets and combine all the layers into one. Finally, the Treasure Pools team hand-sands the surface to remove any sharp points, and a third coat of resin is applied. This final layer is what gives the surface its smooth, non-porous finish.
	Step 7: Finishing Touches Racing lanes, step highlights, etc. are applied at this time. The surface will skin dry in about 1 hour and totally cure in approximately 4 hours from application.